100% Expanded PTFE(ePTFE)

Non-ageing, easy installation and removal, fills irregularities due to it’s low density, unlimited shelf life, UV resistant, non-toxic & does not contaminate.

Compressibility @ 66% & Recovery @10-15% It requires very minimal flange load and can withstand extremely high flange loads and high internal pressures. Cold flow & creep is completely eliminated.

ePTFE Joint Sealant Tape and Cord

MOR Joint Sealant Tape and Cord can resist temperature from -240*C to 260*C (300*C for a very short period) and pressure from vacuum up to 200 bar and pH range 0-14.
Tapes are supplied with self adhesive peel off backing.
An additional layer can be applied at uneven or damaged surface specific areas to ensure seal ability.
Quick and ease of installation, reduced inventory and downtime.
m=2, y=16

Disclaimer:

The values given in the data sheet are for refence only.
Customers are advised to test the suitability of our materials for their application as these values may not directly are good under all complex / multiple application conditions.
Our company does not undertake any liabilty, direct or indirect, linked with the usage and performance of our materials under application conditions.

ePTFE Sheet

MOR Expanded PTFE Sheet can resist temperature from -240*C to 260*C and pressure from vacuum up to 200 bar and pH range 0-14.
Meets high stress retention with minimum cold flow.
High tightness class at relatively low gasket pressure.
Ease of cutting and punching any size and shape, ease of installation and removal, no cleaning or repairing of pitted or irregular sealing areas, can accommodate any intricate shape and an additional layer to compensate for irregularities in sealing areas.
m=2, y=30 N/mm2